Honda Pioneer 700 Dynojet Power Vision 3 ECU Tuner

ECU Tuner for the Honda Pioneer 700

Dynojet Power Vision 3 ECU tuning system for the Honda Pioneer 700. Plugs directly into the factory ECU to read, store, and flash custom calibrations — giving the rider full control over fuel maps, ignition timing, rev limits, speed limits, and fan activation temperatures without any permanent modification to the factory ECU.

Direct ECU Access
Connects to the Honda Pioneer 700 ECU through the factory diagnostic port. Reads the stock calibration, stores it on the device, and flashes new calibrations directly to the ECU. No piggyback controllers, no interceptor modules — this is a direct ECU flash that changes the actual maps the ECU runs.

Real-Time Data Logging
Displays and records live ECU data including RPM, throttle position, engine temperature, fuel injector pulse width, and battery voltage. Mount the Power Vision 3 on the dash to monitor engine vitals in real time while riding, or review logged data after a ride to evaluate tuning changes.

Diagnostic Scanner
Reads and clears diagnostic trouble codes stored in the Honda Pioneer 700 ECU. Identifies active and stored fault codes with plain-language descriptions — eliminating the need for a separate dealer diagnostic tool for basic troubleshooting.

Stores Factory Calibration
The Power Vision 3 stores the original factory calibration before flashing any new tune. The stock calibration can be restored to the ECU at any time — returning the Honda Pioneer 700 to its original factory programming with a single flash.